June 23, 2009

work update

by Oleg Dzhimiev

1. [In Progress] “Verification of everything”

Images below show the results of tests on 10359 board. Fig.2 represents the displacement map multiplied by 128 – {dires_data_out[4:0],7’b0}. The correct resulting image should be black as the maximum of the correlation function must be in 0. Checked the results in simulation – they are the same. Verifying.


Fig. 1 Input image, same image comes from the 2nd channel (Left=Right).


Fig. 2. Result image (incorrect)

Leave a Reply

Your email address will not be published. Required fields are marked *

× 9 = sixty three